Let us consider the differences between reverse osmosis and flow filter by the example of pros and cons of each of these systems. After examining this information, you will have the opportunity to find a filter maintenance company in New York and install a better water treatment system in your home.
Advantages of flow filters for drinking water:
- increased speed of operation;
- relatively low cost of a filtration system;
- availability of useful salts and minerals in treated water;
- proper use of all liquids passing through the system;
- compact dimensions, no storage capacity;
- cost-effectiveness (low cost of replacement filter elements).
Cons of flow filtration systems
- High water treatment speed. Normally, the tap opens completely, while the operating instructions for flow filters state that the pressure should be approximately 1 liter per minute. Non-compliance with this requirement increases the filtration speed to 5 litres per minute. Accordingly, the efficiency of the flow cleaning system will not exceed 20%. The degree of opening of the tap for maximum filtration can only be determined experimentally by placing special marks on the tap.
- Difficulties encountered in selecting the required cleaning cartridges. Before purchasing a flow filter, chemical and bacteriological analysis of the fluid should be performed. Prefabricated flow systems generally include standard cleaning elements that effectively deal with sand, rust and chlorine. Without knowing the chemical composition of tap water, it is difficult to find a filter that can remove all harmful impurities from it. In addition, the elimination of microorganisms requires cleaning systems equipped with lamps with UV rays.
- Difficulties of cartridges condition monitoring. Their resource is designed to process a certain amount of liters of water. However, the flow filters are not equipped with a meter. After a month of operation it is impossible to determine the number of liters of purified liquid. If the cartridges are not replaced in time, the filtered water has the same composition as ordinary tap water, i.e. by and large it is not suitable for drinking.
The advantages of reverse osmosis filters
- Thorough cleaning of water from impurities, bacteria and other microorganisms.
- High quality of the liquid, independent of the condition of the filter element. As the resource is depleted, the performance of the system is reduced, but the water treatment result is still excellent. When the cartridges are replaced, productivity returns to the same level.
- No need to monitor filtration speed: the tap can be opened completely and all cleaned drinking water can be drained from the storage tank. Typically, the tanks contain between 8 and 12 litres of water suitable for use. After approx. one hour the tank will be filled with filtered liquid again.
- The reverse osmosis membrane prevents any elements other than water and oxygen from entering. Contaminants and microorganisms are removed from the filtered liquid and discharged into the sewage system.
- The reverse osmosis filter design contains elements that remove mechanical impurities from the water (sand, muddy sediments, etc.). These elements are located up to the membrane, respectively, even in the presence of harmful bacteria or microbes in drinking water they can not penetrate. Here you can study the apec water filtration system https://www.highwaterstandard.com/apec-water-filter-installation-nyc in more detail.
- Dimensions affected by the storage tank for purified water entering the reverse osmosis system. In most cases, you can easily install the device under the sink in the kitchen. Reverse osmosis systems include compact models that can be placed on the worktop near the sink.